23-3 Q- Quartz Fluorometer micro square cells stoppered
These type 23 square quartz fluorometer cells have been specifically designed by Starna for use with the FCA range of adapters listed below. The adapter locates the square cross section cell accurately in the center of the instrument cell compartment. Therefore, for a given path length, the cell is optimized for minimum volume and maximum sensitivity. All four windows and the base of the cells are polished and are available with either an open top or with a PTFE stopper supplied with the type 23- cells. The FCA adapters have exterior dimensions of a standard fluorometer cell (12.5mm x 12.5mm) and interior dimensions to accommodate the square micro fluorometer cells listed. Apertures are machined into the adapter wall to allow for transmission of the excitation and emission energy at either 8.5 or 15mm 'Z' dimension. The aluminum adapters are black anodized to eliminate stray light. The correct adapter for a particular cell can be identified from the listing below.
|Description:||Square Micro Fluorometer Cell, Stoppered|
|Physical Configuration:||Square interior and exterior, Stopper top closure|
|Primary use:||Fluorometer measurement in range as listed, typical useable volume between 0.225 and 0.875ml depending on cell size and instrument used.|
|Clear windows:||Four, with polished base|
|Instrument:||For use with fluorometers|
|Pathlengths available:||3, 4, 5mm|
|Most commonly used path length:||dependent on customer preference|
|Cell top:||PTFE stopper|
|Window material Spectrosil Quartz or equivalent, useable range: 170 to 2700nm.|
We carry hundreds of cells, send an e-mail telling us what you need and we'll find it for you.