3-3.30 Quartz Fluorometer micro square cells

SKU: 3-3.30-Q- Category:

$307.00

This range of Micro Fluorometer cells has been specifically designed by Starna for use with the FCA range of adapters listed below. The adapter locates the square cross section cell accurately in the center of the instrument cell compartment. Therefore, for a given path length, the cell is optimized for minimum volume and maximum sensitivity. All four windows and the base of the cells are polished and are available with either an open top or with a PTFE stopper supplied with the type 23- cells. The FCA adapters have exterior dimensions of a standard fluorometer cell (12.5mm x 12.5mm) and interior dimensions to accommodate the square micro fluorometer cells listed. Apertures are machined into the adapter wall to allow for transmission of the excitation and emission energy at either 8.5 or 15mm 'Z' dimension. The aluminum adapters are black anodized to eliminate stray light.

 

Description:Square Micro Fluorometer Cell, open top
Physical Configuration:Square interior and exterior, open top, no closure
Primary use:Fluorometer measurement in range as listed, typical useable volume between 0.225 and 0.875ml depending on cell size and instrument used.
Clear windows:Four, with polished base
Instrument:For use with fluorometers
Pathlengths available:3, 4, 5mm
Most commonly used path length:dependent on customer preference
Cell top:Open top, no closure available

 

Window material Spectrosil Quartz or equivalent, useable range: 170 to 2700nm.
StarnaPathExteriorInteriorUseNominalNumber
CatalogLengthWidthLengthHeightWidthLengththisVolumePolished
NumbermmmmmmmmmmmmAdaptormlWindows
3-3.45-Q-335.55.54533FCA30.3155
3-4.45-Q-446.56.54544FCA40.5605
3-5.45-Q-557.57.54555FCA50.8755

We carry hundreds of cells, send an e-mail telling us what you need and we'll find it for you.

Additional information

Pathlength

, ,