Xenon Flash Lamp

Category:

$0.00

  • *Bulb Type

    • $
    • $

    Detailed Product Description:

    CW Xenon Lamp, 35 W, 185-2000 nm, 1000 hrs

    Detailed Product Description:

    High Power Xenon Source, 75 W, 185-2000 nm, 1000 hrs

The HPX-2000 is ideal for reflectance or fluorescence spectroscopy applications where often a strong source is required. The light has a 35 W xenon source and features an integrated filter holder to condition the light before it enters the fiber optic.

The HPX-2000 has an integrated shutter that can be controlled by a TTL signal or a switch on the front panel, allowing you to limit the exposure of the sample to this high-intensity source.

 

  • UV to NIR response -- provides output from 185 nm-2000 nm (2.0 µm)
  • High power source -- nominal bulb power is 35 W
  • Integrated shutter -- helps to protect light-sensitive samples
  • Built-in filter holder -- accommodates filtering of light before it enters the fiber optic aperture

 

The HPX-2000-HP-DUV light source is much more intense, especially in the UV region. Driven by a 75 W source, the HPX-2000-HP-DUV provides output intensity that is almost 4x higher across the entire range compared to the output of the HPX-2000.

The HPX-2000-HP-DUV has an integrated shutter that can be controlled by a TTL signal or a switch on the front panel, allowing you to limit the exposure of the sample to this high-intensity source.

 

  • UV to NIR response -- provides output from 185 nm-2000 nm (2.0 µm)
  • Extra high power source -- nominal bulb power is 75 W
  • Integrated shutter -- helps to protect light-sensitive samples
  • Built-in filter holder -- accommodates filtering of light before it enters the fiber optic aperture

HPX-2000

Engineering:

Wavelength Range:
185nm – 2μm
Source:
HPX-2000 Xenon Light Source
Nominal Bulb Power:
35 W
Typical Output Power:
1.52 mW
Source Lifetime:
1,000 hours
Warm-up Time:
25 minutes

Physical:

Shutter:
Yes
Fiber Connector:
SMA 905
Dimensions:
14.5 x 16.5 x 26 cm
Integrated Filter Holder:
Yes
Power Consumption:
50 W
Trigger/Shutter Input Connection:
SUB-D-15 pin
Trigger/Shutter Input Signal:
TTL; Up to 2.5 Hz maximum
Weight:
6 kg
Power Requirements:
85-264 V, 50/60 Hz

Environmental:

Safety & Regulatory:
CE, VDI/VDE 0160, EN 61010
Operating Humidity Specification:
5-95% without condensation at 40°C
Operating Temperature:
5°C – 35°C

HPX-2000-HP-DUV

Engineering:

Wavelength Range:
185nm – 2μm
Source:
Continuous Xenon
Nominal Bulb Power:
75 W
Typical Output Power:
6.13 mW
Source Lifetime:
1,000 hours
Warm-up Time:
30 minutes

Physical:

Fiber Connector:
SMA 905
Dimensions:
14.5 x 16.5 x 26 cm
Integrated Filter Holder:
No
Power Consumption:
105 W
Trigger/Shutter Input Connection:
SUB-D-15 pin
Trigger/Shutter Input Signal:
TTL; Up to 2.5 Hz maximum
Weight:
6 kg
Power Requirements:
85-264 V, 50/60 Hz

Environmental:

Safety & Regulatory:
CE, VDI/VDE 0160, EN 61011
Operating Humidity Specification:
5-95% without condensation at 40°C
Operating Temperature:
5°C – 35°C

You may also like…